MULTIPLEX Twister Ducted Fan RC Jet with EDF unit

Description

Brand New in Box
MULTIPLEX Twister Ducted Fan RC Jet  with EDF unit
Construction:
Elapor foam, gray in color Wings: Two-piece Ducted Fan Power Set: Multiplex DF69 Impeller Unit with removable intake ring and Himax HA2825-3600 brushless motor Radio Compartment: Accessible under canopy Canopy: Elapor foam Aileron Control: Dual servo Cowl: Elapor foam Decals: Peel and stick application with Building Time: Ready to fly in several hours.
INCLUDES:
Pre-molded wings, fuselage and tail assemblies, pushrods, all hardware, impeller unit and brushless motor, two peel and stick decal sheets, illustrated instruction manual REQUIRES: Radio: 3-channel with micro receiver Servos: Three micro (2-ailerons, 1-elevator) Battery: 3-cell LiPo, at least 2500mAh Electronic Speed Control: At least 45 amp that is compatible with a 3-cell LiPo battery 12" (300mm) Servo Extensions: Three for ailerons and speed control 24" (600mm) One for elevator servo Misc. Items: Building and field equipment COMMENTS: This model is NOT made of styrofoam and it is not possible to glue the material using white or epoxy glue. Medium CA glue used with an activator or hot-melt glues are the only methods of gluing recommended by the manufacturer.
Wingspan: 33.5" (850mm)
Approximate Weight: 31oz (880g) with 2500mAh battery
Overall Fuselage Length: 46" (1170mm)
Wing Area: (25.5 sq dm) Wing Loading (FAI) Minimum: (31g sq dm) Airfoil: Semi-symmetrical
CG (Center of Gravity): 3.9 - 4.3" (100-110mm) behind the leading edge of the wing measured at the fuselage Control Throws-
Ailerons Up and Down: 0.79" (20mm) +/- Exponential: 30% Elevator Up and Down: 1.2" (30mm) +/-
FREE SHIPPING!!!
***************
Buy with Confidence, I ship @ same day