-40%
Watts WD-10-THD 20 lb. Grease Trap with Threaded Connections
Watts WD-10-THD 20 lb. Grease Trap with Threaded Connections
Watts WD-10-THD 20 lb. Grease Trap with Threaded Connections
Watts WD-10-THD 20 lb. Grease Trap with Threaded Connections
Watts WD-10-THD 20 lb. Grease Trap with Threaded Connections
Watts WD-10-THD 20 lb. Grease Trap with Threaded Connections

Watts WD-10-THD 20 lb. Grease Trap with Threaded Connections

$ 100.77

Availability: 85 in stock
  • Country/Region of Manufacture: China
  • California Prop 65 Warning: WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
  • MPN: Does Not Apply
  • Brand: Watts
  • All returns accepted: ReturnsNotAccepted
  • Material: Steel
  • Capacity: 20 lb.
  • Model: WD-10-THD
  • Condition: Item is new out of the original packaging. This item has damage to the top and the corners are bent inwards.
  • Flow Rate: 10 GPM

    Description

    Watts WD-10-THD Details
    The Watts WD-10-THD 20 lb. grease trap with threaded connections prevents greasy substances from entering plumbing systems, septic fields, and wastewater treatment facilities where they cannot be processed properly and could harm the environment.
    Grease traps like the Watts WD-10-THD are often used with cooking or prep sinks, pot sinks, and commercial dishwashers in various types of commercial food service operations. A flow restrictor on the inlet side of the interceptor slows incoming effluent and redirects it through baffling inside the grease trap.
    The Watts WD-10-THD Grease Interceptor features a body constructed of 11-gauge cold rolled steel with an oven-cured, acid-resistant baked gray epoxy coating. Other standard features include a solid steel cover with gasket, a removable baffle assembly, a deep seal trap with cleanout, no hub connections, and an external cast iron flow control fitting (flow restrictor).
    The Watts WD-10 grease trap has a grease capacity of 20 lb., and a flow rate of 10 GPM. It is PDI (Plumbing & Drainage Institute) Certified, and meets the industry and PDI Standard PDI-G101 for separation efficiency. This standard specifies that the grease trap must maintain 90% separation efficiency up to its rated grease retention capacity.
    WATTS WD-10-THD SPECS
    Length
    21 3/4 Inches
    Width
    14 Inches
    Height
    12 Inches
    Capacity
    20 lb.
    Features
    Threaded Connections
    Flow Rate
    10 GPM
    Inlet and Outlet Size
    2 Inches
    Material
    Steel
    Type
    Grease Traps
    PA1034
    ** This item does NOT include any warranty. Please feel free to contact us if you have any questions. **